Monday, May 9, 2016

Buying a Catalina 320 - Part 2

In response to a question that was posed on the Catalina 320 list by a prospective buyer of a Catalina 320 looking for problem areas to be aware of, I wrote the following response. This response has been refined by input from others and has been improved from the original email for publication. 

Due to the length of the material, it is being broken out into two blog entries. This is part Two. For part one, click here.

Catalina 320 Pre-Purchase Inspection

By Doug Treff, September Song, Hull 350

General things to look for in your prospective purchase:

First of all, hire a competent marine surveyor in your area. Don't rely on your broker to recommend one. Find someone who has no "skin in the game". Many times, marina owners and managers will recommend a good surveyor. Your surveyor will look for all of the following, but you can save some money by educating yourself and eliminating any boats that have obvious problems. In addition to the usual Yacht Pre-Purchase survey, I always recommend people to have the engine surveyed by a diesel mechanic, including oil analysis. Many times this can be combined with sea trial and survey day. In the long run, this is money well spent. Most marine surveyors are not engine mechanics and they will usually clearly state that you should hire a mechanic for a complete engine inspection. Major engine work or re-powering a sailboat is expensive and you’ll want to know ahead of time, so you can make an appropriate allowance in your offer.

Your job here is to locate show-stoppers that would cause you to not buy the boat. This will save you money by preventing the survey of multiple vessels.  Use the very simple inspection list below to weed out boats that need work. You will be astonished by what you can find with no more than a critical eye and a slightly cynical nature. This list is NOT comprehensive and is meant only to help you find obvious problems on your own. Your surveyor will do the rest. Bring with you a small flashlight and a notepad for this inspection. Signs of shoddy workmanship or amateur-looking repair jobs should lead you to question everything. Take lots of notes – if you’re looking at multiple boats they will all start to run together. If appropriate, use your smartphone to snap some photos as well.
  1. If the boat is out of the water, walk the perimeter at ground level and examine the rub rail from below. You are looking for any deformities that may indicate impact damage. The rub rail is made of aluminum and will show bends and deformities where serious collisions may have occurred. These may also be potential leaks inside to examine later. 
  2. Examine the bottom closely. Make note of excessive paint build-up or peeling bottom paint, as
    Bent Rudder Shaft
    this will be a job facing you at some point if there are 10-20 years of paint built up.  The bottom should be fair and smooth. Look for signs of blistering. While you're down there, closely examine the propeller and shaft, looking for signs of pitting or corrosion that could indicate an electrolysis problem. Stand directly behind the center-line of the boat and check that the rudder is properly aligned with the keel, not bent to either side. Especially important with shoal draft models - see the "Design Flaws" section of this post.
  3. While you're walking around the boat on the ground, stand back and walk slowly, examining the hull from a distance. Wear a pair of polarized sunglasses. Often they will reveal things that escape the naked eye.
  4. Walk the entire deck and feel for soft spots that indicate serious structural problems. Gently test lifeline stanchions and other deck fittings for soundness.
  5. Look around at the attachment points for the standing rigging. Any signs of rust or hairline cracks could indicate a serious problem. Look for cracks in the swaged fittings and also in the chainplates where they attach to the deck.
  6. First impressions: Upon entering the cabin, is it clean and tidy, or a cluttered mess? Messy owners are often lazy about proper maintenance.
  7. Use your nose. Does it smell like mildew, diesel, or sewage? All these odors could be signs of potential problems - and of course, each smell will have a specific cause. You'll want to examine what could be causing any odors, because it could be costly to clear up later. Sewage odors have many causes, one of which is noted in this post. Generally, the holding tank related problems noted on C320’s are easily repaired and documented on the C320 site. Diesel odors? Mildew smell? Pull up the floorboards and look for stagnant water or signs of an oil slick on the bilge water. This could contribute heavily to any odors, especially fuel or oil leaks, as well as mildew odors from stagnant water in the bilge. If you find oil or fuel in the bilge water, alert the marina manager and do not turn on the bilge pump!
  8.  While you have the floorboards up, examine the visible structural grid below them for any signs of stress cracks or repair jobs. This may be difficult due to limited access.
  9. Also in the cabin, look for signs of leaks. Leaky decks can be a real problem once the core gets wet and starts to delaminate. Water stains on wood bulkheads and floors, peeling varnish, drip spots or stains on upholstery are signs of trouble. Feel the acorn nuts in the cabin roof for water droplets. Look on those nuts for discoloration or deposits that might indicate leaks. Examine the interior areas around the chainplates and mast base, looking for signs of water intrusion.  Anything that looks like it's been leaking for a long time is a potentially serious problem. A good strategy is to examine the interior of a boat within hours of a rain event. Not always possible, but it helps.
  10. If your broker will allow it, pull the forward engine cover and examine the fiberglass drip pan
    under the engine, looking for any obvious signs of leaking. While you're looking at the engine, check the belt tension (not too tight or too loose), and just look over the engine. Most well-cared-for marine engines are (nearly) spotless, and show little sign of oil or grease build-up. Yanmar paints everything including the hoses. If you're looking at a boat that is 20 years old and the hoses are painted like the engine, there's a strong possibility that the hoses are 20 years old as well. Look at the raw water pump. Feel around on the underside for any dripping water that could indicate a leaky system. Take a white paper towel or rag and wipe around some of the joints in the diesel fuel system. Off-Road diesel in the US is usually dyed pink and will show up clearly on a clean white paper towel. You should not find any fuel leaks. Feel the bottom edge of the oil filter and the lowest point on the engine and see if it has any oil drips forming. If you see a can of QuickStart (pictured) sitting in the engine bay, that's a sure sign the owner is having starting issues. Don't use this stuff. Get your engine repaired before you destroy it.
  11. Look around the batteries and examine the fiberglass below them for any signs of acid damage from leaky batteries. Even if current batteries are good, there may be damage from battery leaks gone by.
  12. Glance around the cabin for any signs of amateurish or non-standard repairs. Electrical
    components should look professionally installed, and there should not be any loose or dangling wires of unknown origin. Automotive battery chargers have no place on a boat!
  13. Examine the hull for signs of repair work and the deck as well. When anti-skid is repaired, it becomes quite obvious due to the intricate pattern. Learn the standard anti-skid patterns of the C320 and question anything that looks non-standard. Repair work is not necessarily a problem if done well. Trust, but verify that work is done right. Closely examine the transom area for crazing where the swim ladder touches when lowered. There is a lot of stress on this area when the ladder is being used.

By this time, you should have a fairly good idea if the boat you are examining is sound or not. After you've decided to make a purchase, make your offer contingent on a successful pre-purchase survey, engine survey, and sea trial. Don't skip these steps.  

After you’ve bought your C320, please visit the C320 IA website and join the association for additional access to resources and information about your boat.

Now go sailing!

Tuesday, May 3, 2016

Buying a Catalina 320 - Part 1


In response to a question that was posed on the Catalina 320 list by a prospective buyer of a Catalina 320 looking for problem areas to be aware of, I wrote the following response. This response has been refined by input from others and has been improved from the original email for publication. 

Due to the length of the material, it is being broken out into two blog entries. See Part Two in a future entry.

Catalina 320 Review and Known Issues

By Doug Treff, September Song, Hull 350

In my opinion, the Catalina 320 is a fine vessel for the purpose that it serves me - cruising the Chesapeake Bay. As with any boat, there are pluses and minuses with the design.  Every boat design is a compromise of form and function. I believe that Catalina hit a home run with the 320, and its continued popularity, even after being replaced by a newer model, bears that theory out. The strong C320 owners association adds value as well, since we all share ideas and solutions to problems. Below is a list of things I love, things I don’t love, common repair issues, and design flaws for the C320.

Things I Love:
  •  The Aft cabin - Having the Aft cabin really makes a huge difference in the amount of space onboard for accommodating guests. It also offers more privacy than other boats without this feature.  At the 2015 boat show in Annapolis, I toured the current models. The 315, which Catalina considers an equivalent new model to the discontinued 320, does not have the same size aft cabin. You need to move up to a 355 to get a similar aft cabin now.
  • It's competitive compared to other models - I am continually amazed how I can hang with larger boats when out sailing. Boats that should have a speed advantage due to sail area and waterline length, yet I can keep pace with them.
  • The Cockpit is comfortable and roomy for entertaining, and the large wheel makes it easy to sit outboard and see around the cabin while steering the boat. Bonus - the walk-through transom.
  • A full shower in the head - This is my first boat with a shower and it was a huge selling point.
Things I Don't Love:
  • Side-loading aft berth - Whoever sleeps closest to the door to the aft cabin will be disturbed when the other person needs to get up in the middle of the night for any reason. Unfortunately, in this size vessel, there's no other way to design an aft berth this large.
  • Cabin Storage Space - There is limited storage space on the boat. Due to the location of the batteries and sewage tank, the starboard settee is not very useful for storing things. I would never put food in there and you really shouldn't pile a lot of stuff around the batteries.
  • Sail handling locations - When single-handing, the helmsman will need to leave the helm completely to tend the main sheet due to its location on the cabin roof. I recommend that every C320 owner make it a priority to properly rig the reefing set-up and practice using it so they can do it efficiently when needed. I recently discovered that my traveler control lines are long enough to reach back to the helm area. When things get heated, I make a point of making sure the traveler lines are led all the way aft where I can reach them from the wheel. This makes it easy to dump the main in a gust and keep things under control. I generally don't like Hunters but one of the things I've admired about them is the arch with the main sheet right at the helm station. The same comments apply to the Jib sheets. The primary winches need to be about 2 feet further aft for handling by the helmsman.
  • She rounds up easily - Due to the very wide aft cross-section, when the boat heels too far, the rudder loses effectiveness, causing the boat to round up, often resulting in an unexpected tack. Especially troublesome when considering the other problem regarding sail handling. If single-handing, you cannot dump the sails quickly while also tending the wheel. The solution is keeping heel angle under control through sail trim, and reef early. See my note above about keeping the traveler lines handy.
Common C320 Repair Issues:

There are very few inherent problems that span across all C320 model years. During the production run, Catalina made changes to their design based on customer feedback. The 320 is a good example of a reliable production boat and many survey problems are due to poor or deferred maintenance. Below is a list of known problems and issues that has been pulled from monitoring the C320 list for a number of years. It will give you a good check list.

  • Early models of the C320 did not have solid fiberglass in the deck around the chain plates to protect the core from water leaks. Sometime later, they started doing solid Fiberglass in these areas. Nobody has been able to definitively state when that change was made, so exercise caution here and address chain plate leaks ASAP.
  • Stemhead fitting – There is a known flaw in the design of the original stemhead fitting which could lead to rig failure if a crack develops. The stemhead fitting on all C320s should be examined closely per the article here. It might be wise to share the following information with your surveyor. http://www.catalina320.com/filemgmt_data/files/Stemhead%20Article.pdf
  • Sewage tank vent design flaw – Catalina uses a 5/8” vent fitting on a ¾” hose. The vent is too small and the screen often clogs. Easy to fix, but this can cause all kinds of holding tank problems due to poor venting of tank. See the association site for a fix to this issue.
  • Older 320's may need a fuel tank replacement. If you search the 320 forum, you'll find discussions of fuel tank leaks over the years. Consensus seems to be 15-25 years is about when the failures start in Catalina aluminum tanks. Replacement tanks are available and they DO fit in and out of the boat without cutting any fiberglass.
  • Slow water leak from Aqua-Lift muffler box - You'll need to have your mechanic check for this during the sea-trial. Not a huge amount of water, but it can contribute to an exhaust odor in the cabin over time.
  • Recent reports of failed refrigerators have revealed that there is a possibility of the fridge compressor being damaged by rainwater leaking from the propane tub above. Be sure to closely inspect the compressor - located on a shelf in the aft port locker.  If you find any signs of rust or water drips, be sure to look carefully at the propane tub and the connection points where wires and hoses pass through it. Also, make sure the water drain pipe of the propane tub is not clogged. When the propane tank is present, it takes only a small amount of water to fill up the propane tub and then it overflows.
Design flaws – other issues:
  • Port List – Not every boat, but many C320 owners have noticed a slight list to port. This could be different from one boat to the next depending on installed options like air conditioning, or extra batteries.
  • 1996 and older models do not have a molded toe rail aft of the cabin. This is a safety issue and I have already nearly gone overboard twice because my foot slipped right off the boat. This issue was rectified with the 1997 model year.
  • Early models (1995 and older) had a shallow bilge. The deeper bilge is more desirable if you can find one.
  • Rudder depth - On the shoal-draft (wing keel) models, the rudder depth is the same as (some claim it is deeper than) than the keel. Nonetheless, if you have the shoal-draft (wing keel) model, be very protective of the rudder in grounding situations. Rather than powering through, it would be advisable to try and back off any grounding you encounter.
As you can see, no boat is without inherent design flaws and common problems. Don't let this list scare you off. The majority of the C320 fleet out there today is well-loved and cared for. Hopefully, you now will be better armed to uncover some of the common issues.

The next post in this series will focus on how to do your own pre-purchase inspection of a sailboat before you submit an offer or hire a marine surveyor.